Use An Integrated Machine Or Build A Machine Room?

Use an integrated machine or build a machine room? 2023-06-09 10:56:03

Use an integrated machine or build a computer room?

If your swimming pool is commercial or open, it is best to use the machine room water treatment method, that is, the water treatment method that uses physical filtration into sand tank filters or diatomaceous earth filters. Private or personal swimming pools can be wall-mounted.
The computer room type occupies a large area and the installation cost is high, but the water in the entire swimming pool can basically be treated clean. The installation cost of the wall-mounted type is low, but it can only treat the water in the water area near the wall-mounted type, and the middle part is not treated cleanly.
For small swimming pools, there is nothing wrong with using wall-mounted equipment for swimming pools with tens of tons or one or two hundred tons of water, but if swimming pools with a capacity of more than 500 tons or even more than 1,000 tons use wall-mounted water treatment equipment, then there are no other disadvantages. Yes, the most important disadvantage is that it requires a large number of equipment, and it may not be able to treat the water clean. Small swimming pools use less wall-mounted equipment, and less manpower is wasted. If it is a large swimming pool, more equipment is used, and a lot of manpower will be wasted.

Wall-mounted introduction and advantages and disadvantages
Wall-mounted swimming pool water treatment equipment generally uses non-woven fabrics or polyester fiber cartridges as filter media for filtration.
When non-woven fabrics are used, they are usually bag-type, placed at the water suction port or water outlet of the water pump. Generally speaking, the water outlet effect is average, and the filtration accuracy is not high. When using it, the filter bag needs to be removed frequently for washing. Non-woven filter bags can be used quite a long time.
When the polyester fiber cartridge is used for filtration, the effluent accuracy is better, the lowest can reach 8μm, but with use, the accuracy will gradually decrease to 40μm, so it is necessary to take out the filter cartridge regularly for high-pressure cleaning, and the cleaning frequency depends on the water quality. Polyester fiber filter cartridges are consumables, and their service life depends on the intensity of use.
Non-woven filter has indeed been banned in Europe and the United States for many years, and polyester fiber cartridge filter is widely used in small private swimming pools in the United States.
Some wall-mounted swimming pool water treatment equipment has its own heating system, which generally adopts electric heating. The pool water is not safe to touch. Some merchants advertise that wall-mounted swimming pool water treatment equipment can not only be used in all swimming pool water treatment, but these are seriously irresponsible. For large swimming pools, wall-mounted swimming pool equipment can only circulate the water around the swimming pool. For the pool center The water in the pool is helpless, forming a dead water zone. The quality of this part of the water cannot be treated, and the health of swimmers cannot be guaranteed.
In general, the wall-mounted swimming pool water treatment equipment is easy to use, does not require a machine room and pipelines, and has its own filtration and disinfection lighting system. The disadvantages are that the voltage is unsafe, the washing of the filter medium is troublesome, and it is easy to form dead water areas. It is not suitable for large and medium-sized swimming pools. swimming pool.